Daniel N. Jones

 

Daniel N. Jones was among the group of machinists trained by Hopkin Thomas who went on to achieve marked success. Little has been located to date on his early life. He was born ca. 1833 and came to the Lehigh Crane Iron Company, probably in the early 1850s. From there he went to the Cambria Iron Company where he rose to the position of superintendent.

 

Founded in 1852, the Cambria Iron Company of Johnstown made an important contribution to American industrialism - it is considered one of the greatest of the early modern iron and steel works. Forerunner of Bethlehem Steel Company, United States Steel Corporation, and other late 19th and 20th century steel companies, the Cambria plant became a model for the industry. In the late 1800s Johnstown attracted the best and brightest minds in the industry, notably William Kelly, George and John Fritz, Daniel J. Morrell, Robert W. Hunt, William R. Jones, and Alexander Holley. These men advanced iron and steel technology through invention and industrial design in Johnstown, work which was widely copied by other iron and steel companies1.

 

Soon after the Cambria Iron Company established its first Bessemer plant in 1869, Johnstown became one of the nation's leading iron and steel producers, and, by the mid-1870s, was the leading producer of iron and steel rail in the United States. Led by Daniel J. Morrell, the president of Cambria Iron, and Daniel N. Jones, the chief engineer, the company expanded its iron production with the introduction of two additional blast furnaces. The two furnaces were the largest in the area and nearly identical in size to the impressive Lucy No. 2 (1878) and Edgar Thomson "A" (1880), two of Andrew Carnegie's blast furnaces in Pittsburgh. Each furnace measured 75' in height and contained a bosh 20' In diameter, with a hearth 8' in diameter. Capped with a single bell, both furnaces were manually charged. Each produced 600 tons of Bessemer iron per week2.

 

With the death of George Fritz, in August of 1873, Daniel N. Jones was appointed superintendent of Cambria.  Daniel N. Jones had learned his trade at the Lehigh Crane Iron Works in Catasauqua where he was trained under Hopkin Thomas3.

 

Under the direction of Daniel Jones, who had succeeded his brother, Captain William R. Jones, as chief engineer, Cambria Iron's new blast furnaces received carefully controlled amounts of ore, limestone, and coke. The composition of ore used in the furnaces in which Bessemer metal was produced consisted of one-half Springfield limonite ore (averaging 50 percent iron), and one-half Lake superior specu1ar ore (containing 60 to 66 percent iron). Interestingly, the native spathic ore, which was self-fluxing, was not used in the production of Bessemer metal, but it appears to have been used for other grades of metal, such as wrought iron. Two years after Cambria Iron put it into blast, engineer Alexander Holley declared that the Furnace No. 5 was "uniformly successful in its performance, which is largely due to its excellent management on chemical principles, and partly, of course, due to its construction."2

 

At a date uncertain, Jones left the Cambria Works and joined with William Jackson Palmer, a wealthy industrialist whose railroad interests had brought him to Colorado. Palmer envisioned "an integrated industrial complex based on steel manufacturing" in which all necessary resources were controlled by one company. In 1879, as Palmer's railroads were expanding, he noted the demand for steel for rails was high in Colorado. This prompted him to construct Colorado Coal and Iron Company's steel mill south of Pueblo. His dream became a reality for his successors when, in 1892, CC&I merged with the Colorado Fuel Company to form Colorado Fuel and Iron. This company became Colorado's largest employer and dominated industry around the state for decades.4

 

Daniel N. Jones, was appointed general superintendent of the steel works of the Colorado Coal and Iron Company, at Pueblo.

 

Jones died on  December 10, 1888, aged about 55 years5.

 

Sources:

1. Wikipedia, Cambria Iron Company

2. Cambria Iron Company, Blast Furnaces No. 5 & 6, Historic American Engineering Record No. PA-109-F, Dept. of the Interior, Washington, DC.

3. History of Allegheny County, Pennsylvania, A. Warner & Co., Chicago, Ill., 1889, William Richard Jones biography, pp 284 – 285.

4. Wikipedia, Colorado Coal and Iron Company.

5.Swank, James M., American Iron and Steel Association,  Statistics of the American and Foreign Iron Trades, Iron and Steel Necrology, 1888

 

 

Return to the Biographical and Genealogical Records Page

 

About The Hopkin Thomas Project

 

 

Rev. January 2011